Electrical and Control System Engineer

Dovre Group is a global provider of high-value project management services and has been supporting its clients since 1984. In 2021, the Dovre Group’s net sales were EUR 142.7 million and its operating result was EUR 6.1 million. Project Personnel accounted for 53%, Consulting for 11% and Renewable Energy for 35% of the net sales. Dovre Group employs more than 870 people worldwide and executes assignments in more than 20 countries.

Job Purpose

The purpose of the Electrical Engineer is to guarantee the compliance from the Contractor within the following subjects:

• The Scope⠀of⠀Work
• The⠀Aramco and⠀International⠀applicable⠀standards
• The⠀Quality of⠀the⠀Engineering⠀Design
• Optimization⠀of⠀Electrical⠀Project⠀Design to⠀optimize⠀the⠀Operational⠀cost &⠀Maintenance⠀cost
• The⠀Appropriate⠀equipment⠀manufacturing
• The⠀Project⠀Engineering⠀and⠀Purchasing⠀Schedule

Key Responsibilities and Duties

• Review⠀design⠀packages⠀for⠀electrical⠀systems⠀and⠀equipment⠀(i.e.⠀Power &⠀Distribution⠀Transformers,⠀motors,⠀generators,⠀High⠀voltage/low⠀voltage⠀switchgear/Motor⠀Control⠀Center⠀(MCC),⠀distribution⠀network,⠀control⠀equipment,⠀power⠀outlets⠀etc.)including⠀drawings,⠀datasheets,⠀detail⠀scope of⠀work,⠀calculations,⠀Bill of⠀Material /⠀Quantity⠀and⠀preliminary⠀cost⠀estimates,⠀Hazardous⠀Area⠀Classification⠀and System⠀Study.
• Prepare⠀the⠀Project⠀Design⠀Basis⠀Document⠀as per the⠀project⠀scope.
• Prepare⠀the entire⠀project⠀load lists⠀based on⠀the⠀project⠀scope.
• Produce⠀technical⠀reports⠀for the⠀scope of⠀work, and⠀technical⠀specifications⠀for⠀specific⠀electrical⠀equipment⠀which are⠀not⠀mentioned⠀in Saudi⠀Aramco⠀Engineering⠀Standard⠀(SAES) and⠀Saudi⠀Aramco⠀Material⠀Specification⠀(SAMSS).
• Manage⠀the⠀electrical⠀activities⠀of⠀engineering,⠀procurement,⠀and⠀construction⠀(EPC)⠀contractors⠀during the⠀Front End⠀Engineering⠀Development⠀(FEED) and⠀design⠀phase.
• Coordinate⠀with⠀Project⠀managers⠀to⠀finalize⠀the⠀Electrical⠀Engineering⠀scope for⠀the entire⠀project /⠀package.
• Carry⠀out⠀analysis⠀of major⠀equipment⠀selected⠀in the⠀design⠀package.
• Review⠀and⠀respond to⠀technical⠀and site⠀queries.
• Support⠀and attend⠀the⠀equipment⠀“Factory⠀Acceptance⠀Tests”⠀(FAT).
• Experience⠀in project⠀execution⠀in⠀accordance⠀with Saudi⠀Aramco and⠀World Wide⠀industrial⠀standards.
• Monitor⠀and review⠀in⠀coordination⠀with Saudi⠀Aramco PMT⠀the⠀performance⠀and work⠀quality of⠀the⠀contractor.
• Ensure⠀that the⠀design⠀work by⠀contractor⠀is in⠀accordance⠀with⠀Aramco⠀design⠀standards⠀(SAES,⠀SAMSS),⠀applicable⠀codes/regulations,⠀and⠀acceptable⠀work⠀practice.
• Assist⠀the⠀Project⠀Managers⠀and⠀Project⠀Engineers⠀in⠀evaluating⠀Material⠀Requisitions⠀(MR),⠀Technical⠀Bid⠀Evaluation⠀(TBE) and⠀Award⠀Recommendation⠀(AR)⠀provided⠀by⠀Contractor⠀and able⠀to perform⠀Procurement⠀support.
• Review⠀and⠀evaluate⠀Change⠀Orders to⠀ensure⠀full⠀compliance⠀with⠀standards⠀and that⠀costs are⠀in line⠀with⠀project⠀budget.
• Work⠀closely⠀with⠀Engineering⠀Teams⠀during the⠀project to⠀ensure⠀facility⠀integrity⠀in terms⠀of⠀HSE.
• Provide⠀technical⠀assurance⠀for⠀electrical⠀discipline⠀deliverables⠀for⠀projects.
• Prepare⠀approvals⠀of the⠀electrical⠀engineering⠀packages⠀prior to⠀being⠀issued for⠀construction.
• Lead⠀and⠀recommend⠀new⠀improvement⠀solutions⠀for⠀installations⠀or⠀modifications⠀to improve⠀existing⠀facilities⠀and⠀standards.

Educational & Technical Requirements

• 10 -15⠀years of⠀experience⠀in design,⠀engineering⠀and⠀construction⠀(Aramco⠀experience⠀is⠀preferable)
• Bachelor’s⠀degree⠀within the⠀Electrical⠀Engineering⠀field or a⠀BA in⠀Science⠀with a⠀focus in⠀Electrical⠀Engineering
• Certified⠀Engineer⠀desirable
• Engineer⠀must be⠀familiar⠀with NEC,⠀IEEE/ANSI,⠀IEC and⠀other⠀International⠀electrical⠀standards,⠀best⠀practices⠀and value⠀practices
• Be⠀fully⠀familiar⠀with⠀analogue⠀and⠀Digital⠀Control⠀Systems⠀including⠀Power⠀System⠀Automation⠀(PSA),⠀DCS, PLC⠀and SCADA⠀controls
• Thorough⠀knowledge⠀of the⠀English⠀language⠀is⠀required⠀to perform⠀the⠀necessary⠀analysis⠀and⠀studies in⠀depth,⠀make⠀professional⠀presentations⠀and keep⠀up with⠀technical⠀advancements
• Have⠀experience⠀with⠀Electrical⠀Transient⠀Analysis⠀Program⠀(ETAP) or⠀similar⠀software⠀and all⠀Microsoft⠀office.

Competencies

• Plan &⠀Organize
• Analyze⠀& Solve⠀problems
• Communicating⠀openly &⠀effectively
• Excellence/⠀Drive for⠀results
• Safety